I replaced my LCD panel due to a cable issue internally with an "Elegoo Mars - 5.5" Replacement LCD Screen Panel 04" from FilamentOne and have noticed that it seems to have a substantially thicker panel of glass on top of it, see images below:
![[Image: ihqnBdQ.jpg]](https://i.imgur.com/ihqnBdQ.jpg)
Here it is in the back ground to compare to the old panel:
![[Image: GSCa7vl.jpg.]](https://i.imgur.com/GSCa7vl.jpg.)
Is this normal? My printer has a Version B control board (daughter board offset from the main board, with "v04" printed on it, for the screen to plug into). I've fit the panel and the exposure test worked fine. I releveled the build platform to the new panel. The tank does not sit quite right due to the glass being above the chassis metal but the test print im running seems to be working. Do I need to add a Z distance offset to accommodate the raised LCD?
Thanks!
Here it is in the back ground to compare to the old panel:
Is this normal? My printer has a Version B control board (daughter board offset from the main board, with "v04" printed on it, for the screen to plug into). I've fit the panel and the exposure test worked fine. I releveled the build platform to the new panel. The tank does not sit quite right due to the glass being above the chassis metal but the test print im running seems to be working. Do I need to add a Z distance offset to accommodate the raised LCD?
Thanks!