02-19-2021, 10:42 AM
(12-13-2020, 12:11 PM)hardcak Wrote: Im using the printer to create accurate engineering models. Its well known that models are 0.1 mm bigger (ish) per layer due to light scatter exposing the outer edges making outer edges larger and holes smaller. So to compensate people have written tools to erode the image. Nothing works on EM 2 pro!.. even tried Z-suit slicer that comes with this feature, but mot supported on the pro 2. Anybody else having the same issues or have a work around?.
I'm only just getting started, so I won't be of much help, but my most recent print was almost spot on on X and Y, but WAY short on Z. Not sure if that is the Z axis, my settings, my resin, my model configuration and orientation or some combination of the above.