02-22-2021, 05:28 AM
@cliffyk
nice to see your printed stairway-model - i have do the same - other model but same idea.
I have a EMPro2 and can not became correct results. I have a model with round cylinders with stairway on the innerside.
First level is 3,07mm and should 3,1mm - that okay i think so - but the next level is 8.08 mm instead of 8,5mm!
I have test these problem several times - send to elegoo support and they print it with the same problem - after that i don't hear anything fromt he support.
I have send the CAD-Model which is still accurate and the print-file - and also they have sliced by its own and still same problem.
Looks like is probem for the printer-firmware if the print circles and have different levels of z-axis!?
nice to see your printed stairway-model - i have do the same - other model but same idea.
I have a EMPro2 and can not became correct results. I have a model with round cylinders with stairway on the innerside.
First level is 3,07mm and should 3,1mm - that okay i think so - but the next level is 8.08 mm instead of 8,5mm!
I have test these problem several times - send to elegoo support and they print it with the same problem - after that i don't hear anything fromt he support.
I have send the CAD-Model which is still accurate and the print-file - and also they have sliced by its own and still same problem.
Looks like is probem for the printer-firmware if the print circles and have different levels of z-axis!?