01-01-2021, 06:38 PM
Hi,
Lately I got a some lines in my print and I'm not sure what could cause them. Especially because they are so uniform.
They are not very pronounced but big enough that you can feel them when you run your fingers over it.
Both models are printed with 2.5 sec exposure time and 60/210 mm/min lift/retract on an Elegoo Mars 2 Pro.
The female is printed with Elegoo standard grey resin and the male in eSun water washable grey resin.
Has anybody an idea what could cause such lines?
Could this be a lubrication issue of the Z-Axis?
I would re-grease the spindle to test it but I don't have grease at home. Due to the corona situation I could not buy some in a local store but have to order it online, so it will take a few days to arrive.
thanks in advance for the help!
Lately I got a some lines in my print and I'm not sure what could cause them. Especially because they are so uniform.
They are not very pronounced but big enough that you can feel them when you run your fingers over it.
Both models are printed with 2.5 sec exposure time and 60/210 mm/min lift/retract on an Elegoo Mars 2 Pro.
The female is printed with Elegoo standard grey resin and the male in eSun water washable grey resin.
Has anybody an idea what could cause such lines?
Could this be a lubrication issue of the Z-Axis?
I would re-grease the spindle to test it but I don't have grease at home. Due to the corona situation I could not buy some in a local store but have to order it online, so it will take a few days to arrive.
thanks in advance for the help!