01-09-2021, 04:20 AM
(01-08-2021, 10:43 AM)cliffyk Wrote: What do you mean by installing a "new light"? Are you referring to the LCD shutter or the light source beneath the LCD?
"...worked fine for months" is generally an indication of a failed LCD.
Can you post photos of the failed prints?
As you indicated last time i had a problem i bought and installed the LCD. Since then I have replaced the film in all the resin trays as well.
I still cannot print anything reliably, this printer worked for 300 or so hours all the way through the summer. Now i cannot get a decent print out of it.
Please see all photos that i have taken recently
https://gyazo.com/4620a9e10d2e5c390460182905e278f0
https://gyazo.com/c1fc96350497c9273db9623d598f7368
https://gyazo.com/9a71c90072d3e67b5ba561a45268c70a
https://gyazo.com/f9cb80cc6c30f4d8d9345810fb58236c
Those are water based resin, the third one shows and example that worked and one that didnt, the bottom is supposed to be flat
https://gyazo.com/ac1265bd9377d6aaad1bb2756daf9946
Brand new resin tray never been used with the bases stuck to the film
https://gyazo.com/f8ce5ee3c6dd9425a555e2369c1e18d4
Brand new bottle of resin, this shows that the base isnt sticking properly and is giving the same result as weith the water based resin
https://gyazo.com/9d7a293d1e0b291e69bb5b5eca6b9a09
New film base on resin tank, brand new resin and it is sticking one piece the other two pieces were in the next photo up
https://gyazo.com/1221858634f4f2512f83e4dbff2c6c01
https://gyazo.com/c354211233c970bcfe130fb31337f254
https://gyazo.com/103fb93d2d7d49e7b4673583c649891d
If anyone can help please advise.
Many thanks
Sandra