05-09-2021, 10:54 AM
I have a question about the XY resolution of the Mars 2 Pro:
Everywhere is stated that the XY resolution is 0.05mm (50µm). After printing a flat surface with 45° and 0.05 layer height I noticed aliasing issues, meaning, every few mm there was a horizontal line. Assuming the XY resolution is indeed 0.05 and the layer height of 0.05 works too, this shouldn't happen. So I tried to print the same object again with a layer height of 0.051 and the aliasing disappeared.
So, the question is: Is the XY resolution actually 0.051 or am I doing something wrong elsewhere?
Attached are 2 pictures, one printed at 0.05 layer height (50.jpg), showing the lines, the other with 0.051 layer height (51.jpg), being as smooth as it can be.
Everywhere is stated that the XY resolution is 0.05mm (50µm). After printing a flat surface with 45° and 0.05 layer height I noticed aliasing issues, meaning, every few mm there was a horizontal line. Assuming the XY resolution is indeed 0.05 and the layer height of 0.05 works too, this shouldn't happen. So I tried to print the same object again with a layer height of 0.051 and the aliasing disappeared.
So, the question is: Is the XY resolution actually 0.051 or am I doing something wrong elsewhere?
Attached are 2 pictures, one printed at 0.05 layer height (50.jpg), showing the lines, the other with 0.051 layer height (51.jpg), being as smooth as it can be.