Posts: 1
Threads: 1
Joined: May 2020
Reputation:
0
I literally just got a brand new Elegoo Mars Printer today, and when I tried my first print I got memory error M_400. It seems it's having trouble detecting the USB flash drive. Anyone encounter this before? Any solutions?
Posts: 238
Threads: 10
Joined: Dec 2019
Reputation:
8
- try another USB-Stick ?
- open the back of the printer and check the USB-connector on the mainboard ?
Posts: 11
Threads: 3
Joined: May 2020
Reputation:
0
Same for me,
Was able to print the print test Towers. with success.
I remove the USB add a custom file. Was not able to see an preview but ok I launch.. m400 error
I decide to test an other USB. no success
I decide to test an other file from the free folder. no success.
I format.. no success.
I open the machine and every thing was in place. the usb port was properly link and the cord of that usb port was properly link with motherboard. even its glued by Elegoo.
Any other solution?
I got great result for the test.. why afetr the first usb key removal everything go wrong?
Posts: 238
Threads: 10
Joined: Dec 2019
Reputation:
8
show us the file you like to print - turn of the printer when changing the USB-stick
Posts: 238
Threads: 10
Joined: Dec 2019
Reputation:
8
what about the sliced file?
Posts: 238
Threads: 10
Joined: Dec 2019
Reputation:
8
you MUST slice the model with a slicer - The Elegoo can not print native *.stl-files
Posts: 238
Threads: 10
Joined: Dec 2019
Reputation:
8
05-18-2020, 09:24 AM
(This post was last modified: 05-18-2020, 09:24 AM by fromFDMtoSLA.)
ChituBox - and please read the manual ;-)