Swedish alternative to Mean green, Mr clean or IPA.

[MrAsh]

I cannot find "Mean green" in any Swedish stores, and IPA from the store "Kjell & co" is relatively expensive. Nor can I find the right kind of "Mr clean" products.

Has anyone tested any alternative product with satisfactory results that can be purchased in Sweden?

I myself have heard that the product "T-Röd" should work OK, but that it dissolves cured resin in the print if the print is bathing too long in the liquid. NOTE; I have not testet this myself.

[SnyggJohan]

I cannot find "Mean green" in any Swedish stores, and IPA from the store "Kjell & co" is relatively expensive. Nor can I find the right kind of "Mr clean" products.

Has anyone tested any alternative product with satisfactory results that can be purchased in Sweden?

I myself have heard that the product "T-Röd" should work OK, but that it dissolves cured resin in the print if the print is bathing too long in the liquid. NOTE; I have not testet this myself.

I bought "Rödsprit" when I was a biltema. I dont really notice much difference from the much more expensive isopropanol från Kjell & co. I usually leave for a min in one vat, then splash around and move to next vat and leave for a few minutes, then splash around and move a vat with water. 

Im getting good prints :-)
However.. if you find an alternative Im all ears, until then Ill use rödsprit.


32.25kl/l (when buying 4l)
https://www.biltema.se/fritid/friluftsliv-och-camping/gasolkok/rodsprit-2000021819

200kr/l (when buying 1l)
https://www.kjell.com/se/produkter/hem-kontor-fritid/kontorstillbehor/kemi-spray-lim/spray-olja-isopropanol/luxorparts-ipaclean-isopropanol-250-ml-p18358

[SnyggJohan]

I cannot find "Mean green" in any Swedish stores, and IPA from the store "Kjell & co" is relatively expensive. Nor can I find the right kind of "Mr clean" products.

Has anyone tested any alternative product with satisfactory results that can be purchased in Sweden?

I myself have heard that the product "T-Röd" should work OK, but that it dissolves cured resin in the print if the print is bathing too long in the liquid. NOTE; I have not testet this myself.

I bought "Rödsprit" when I was a biltema. I dont really notice much difference from the much more expensive isopropanol från Kjell & co. I usually leave for a min in one vat, then splash around and move to next vat and leave for a few minutes, then splash around and move a vat with water. 

Im getting good prints :-)
However.. if you find an alternative Im all ears, until then Ill use rödsprit.


32.25kl/l (when buying 4l)
https://www.biltema.se/fritid/friluftsliv-och-camping/gasolkok/rodsprit-2000021819

200kr/l (when buying 1l)
https://www.kjell.com/se/produkter/hem-kontor-fritid/kontorstillbehor/kemi-spray-lim/spray-olja-isopropanol/luxorparts-ipaclean-isopropanol-250-ml-p18358

In the name of science I bought a cleaning agent called W5 at Lidl. It was 18kr for 1.25L, Ill print some transparent resin stuff soon, so Ill make a couple of tests so we can compare and write results here.

[Boro169]

Hey guys how did it turn out with the w5 from Lidl?