11-17-2021, 02:21 PM
Hello
I have a recently received a second hand Elegoo Mars printer.
It is working somewhat the way it supposed to work, but i am having some trouble printing the right sizes.
I am trying to print an octopus with segmented tentacles i have succesfully printed on my Anycubic Mega S before, but with this printer the model height is not right. Somewhere i lose about 2mm in height.
I have found a mod to take some play out of the Z axis and it took out about 2mm of play and now it feels solid.
After this i tried to print the octopus again but it seems it had no effect on how the print came out. I am still missing about 2mm in height and because of it the tentacles are fused together again.
At this point i dont know what to do about this issue and i hope you guys have a solution or at least some links to information i could use to fix this issue.
I have a recently received a second hand Elegoo Mars printer.
It is working somewhat the way it supposed to work, but i am having some trouble printing the right sizes.
I am trying to print an octopus with segmented tentacles i have succesfully printed on my Anycubic Mega S before, but with this printer the model height is not right. Somewhere i lose about 2mm in height.
I have found a mod to take some play out of the Z axis and it took out about 2mm of play and now it feels solid.
After this i tried to print the octopus again but it seems it had no effect on how the print came out. I am still missing about 2mm in height and because of it the tentacles are fused together again.
At this point i dont know what to do about this issue and i hope you guys have a solution or at least some links to information i could use to fix this issue.