Model don't stick to the buildplate

[Roberto67]

Hello, I have a question. The prints on my Mars 2 Pro with the flexable buildplate will not stick. Via Patreon I bought some nice miniatures to print. I use Lychee Pro as the slicer for it. I have firts tested with the Rock stl but it would not stick to the flexable buildplate but it sticked to the bottom of the resin vat. Also I have used different settings in Lychee. What are good setttings for a good stick? Thank you in advanced.

[SPfenning]

You might clean the flexplate with acetone and let it dry, prior to a printjob. If still nothing sticks, try to sand it slightly with some grot 400 sandingpaper. Some flexplates are simply not ready at first time and require some additional work. Have experienced it myself too, which made me to give this advise.
If still nothing sticks to flexplate, it's time to fiddle with exposure-time settings ("burn-in"-layers).