Thread Rating:
  • 1 Vote(s) - 5 Average
Ethernet Enabled Printing (Support for ChiTuBox 1.4.0 + 1.5.0)
#31
(08-30-2019, 08:13 AM)drglamenstein Wrote: Any update on the testing?  
Can I just load the epax firmware?

Thanks...


(08-30-2019, 07:29 AM)admin Wrote: Good question...

Since this is using the epax fw that enables the ethernet port and the epax ui so it displays on the screen, you should only need to run the actual fw and ui, but I have not tested to confirm.

I'll test this weekend and update Smile
Reply
#32
You should be able to run just the epax ui and be good to go, I'll actually test that right now...
Reply
#33
I just tested the Epax UI, running the latest elegoo FW and seems to work...
Reply
#34
Thanks for checking!
I'll only load
- UI_3_5-MARS_EPAX.bin
- update.LCD
Much appreciated...
Reply
#35
(09-04-2019, 06:26 PM)drglamenstein Wrote: Thanks for checking!
I'll only load
- UI_3_5-MARS_EPAX.bin
- update.LCD
Much appreciated...

dont even need to run the update.lcd, just the UI Smile
Reply
#36
Hello, everyone.

My firmware is V4.2.16_LCD /1440x2560 /F2.0

i try to install the fpga xxx.bin but i always get the error message: error "no authorization!".

i tried the release:
Mars V4.2.16_LCD /1440x2560 /F2.7
and
MARS EPAX NETWORK ENABLED CHITUBOX 1.4.0 + 1.5.0.zip

does anyone have any idea how I can proceed to activate the network?
Reply
#37
Brick 
how can we remove the epax and return to normal? I tried to reset the normal firmwrae but it does not change anything

because I have a print problem arrived at 6 min of print it stops alone as if I had to stop the print

(09-10-2019, 11:57 PM)fips Wrote: Hello, everyone.

My firmware is V4.2.16_LCD /1440x2560 /F2.0

i try to install the fpga xxx.bin but i always get the error message: error "no authorization!".

i tried the release:
Mars V4.2.16_LCD /1440x2560 /F2.7
and
MARS EPAX NETWORK ENABLED CHITUBOX 1.4.0 + 1.5.0.zip

does anyone have any idea how I can proceed to activate the network?

tries to come back in 4.18 I had that same concern at the beginning
Reply
#38
I can confirm: If you see V4.2.20.3_LCDM /1440x2560 /F2.9 you just need to print UI_3_5-MARS_EPAX.bin

Please update the readme doc:
Code:
4.  If you see V4.2.20.3_LCDM /1440x2560 /F2.9 (GO TO PART X BELOW)

---------- PART X ----------

!!!!! DO NOT USE SD/USB THUMBDRIVE !!!!!
!!!!! ONLY USE A USB THUMBDRIVE!!!!!

1.  Connect USB to computer, delete all files off of the USB thumbdrive
2.  Format USB thumbdrive to FAT32
3.  Copy UI_3_5-MARS_EPAX.bin files from "Firmware Files" folder to USB thumbdrive
4.  Power off Mars Printer
5.  Connect USB thumbdrive to Printer
6.  Power on Mars Printer
-    When powered on, Printer display will stay black and a series of beeps will come from the Printer
-    Once the beeps have completed, the logo will appear and be on the home/main screen of the display
9.  Go to Print, select the "UI_3_5-MARS_EPAX.bin" file and print
10. Once completed, the menu screen will change
11. Go to System and now you should see a Network option
12. GO TO PART C BELOW
Elegoo Mars
Creality CR-X
Reply
#39
This is what I found regarding the mainboard .

       
Please confirm and/or include some pictures and/or links.
Elegoo Mars
Creality CR-X
Reply
#40
Hello,

before I try to upgrade my Mars to ethernet functionality, I would like to know how to switch back to the original software in case of unforeseen problems?!
Also actually I have the FW 4.2.19 /F2.7 installed! Is the instruction still valid even with a higher version number??

BR, Dirk
Reply


Forum Jump:


Users browsing this thread: 4 Guest(s)