I can confirm: If you see V4.2.20.3_LCDM /1440x2560 /F2.9 you just need to print UI_3_5-MARS_EPAX.bin
Please update the readme doc:
Please update the readme doc:
Code:
4. If you see V4.2.20.3_LCDM /1440x2560 /F2.9 (GO TO PART X BELOW)
---------- PART X ----------
!!!!! DO NOT USE SD/USB THUMBDRIVE !!!!!
!!!!! ONLY USE A USB THUMBDRIVE!!!!!
1. Connect USB to computer, delete all files off of the USB thumbdrive
2. Format USB thumbdrive to FAT32
3. Copy UI_3_5-MARS_EPAX.bin files from "Firmware Files" folder to USB thumbdrive
4. Power off Mars Printer
5. Connect USB thumbdrive to Printer
6. Power on Mars Printer
- When powered on, Printer display will stay black and a series of beeps will come from the Printer
- Once the beeps have completed, the logo will appear and be on the home/main screen of the display
9. Go to Print, select the "UI_3_5-MARS_EPAX.bin" file and print
10. Once completed, the menu screen will change
11. Go to System and now you should see a Network option
12. GO TO PART C BELOW
Elegoo Mars
Creality CR-X
Creality CR-X