07-18-2020, 04:15 PM
(07-18-2020, 03:54 PM)cliffyk Wrote:Thanks, that’s very helpful, alas my Mars is a regular one, not a Pro and that function is disabled on the regular Mars(07-17-2020, 02:27 PM)Hywel Wrote:(07-17-2020, 02:21 PM)TheGadge Wrote:That button is on the regular Mars but is disabled so it’s not user changeable.(07-17-2020, 02:18 PM)Hywel Wrote: Ah! Well I did do that - multiple times now to level the build plate on 1, 2 and 3 pieces of paper. It always levels/homes perfectly, but then when I print it does this wierd grind thing. Just to make this extra weird, it only happens on SOME prints, not all. I thought it was an issue with the new Chitubox slicer and went back to my older version but that was a red herring it'd seem. Thanks for the suggestions!
no worries. So, just to be clear, after homing, you can’t come back out of the ‘manual’ screen and click z=0 on the screen top right then?? I have that on my mars pro but I’m away from it at the mo.
See my post here about the "Z=0" function...