10-27-2019, 04:03 AM
... have some high-power LED's with 9Watts or 100Watts @405nm with different voltages (6v or 19V) and much more needed power (21A and 9A), than the driver can support.
Have plans to build a DLP-beamer setup with variable "image"-sizes -- the "bigger" area up to 300x200mm, the "smaller" down to 30x20mm, what's then reducing the pixel size or resolution accordingly too.
Here some of the smaller parts, printed with the Elegoo Mars:
And here more in detail:
With the bigger area the "rip-off" force would be a problem -- but for this we've developed a different releasing methode with "gravity-releasing" some years ago
Viktor
Have plans to build a DLP-beamer setup with variable "image"-sizes -- the "bigger" area up to 300x200mm, the "smaller" down to 30x20mm, what's then reducing the pixel size or resolution accordingly too.
Here some of the smaller parts, printed with the Elegoo Mars:
And here more in detail:
With the bigger area the "rip-off" force would be a problem -- but for this we've developed a different releasing methode with "gravity-releasing" some years ago
Viktor