11-03-2019, 06:25 AM
(This post was last modified: 11-03-2019, 06:31 AM by oeildefaucon.)
(11-03-2019, 04:15 AM)OscarW Wrote: Is very strange that the final print is under 1.27mm for heightHello,
We have same problem
1.27mm for you, 1.10 for me
I search for 2 weeks, can't find a good way
the best result I get is to put a wedge between the arm holder and the top of the Z-axis to delete the mechanical game
so from 1.10 mm I get 0.3 mm, but not perfect with layers of 0.05mm, that 's 6 missed layers
good luck