Thread Rating:
  • 2 Vote(s) - 5 Average
Z Axis Height Calibration
#54
(12-03-2019, 12:21 AM)Blackbird2016 Wrote:
(12-02-2019, 11:48 AM)usergoo Wrote: Please learn to read before going into tirades.No one is changing the step height..M8084 is z offset. Z offset is in steps and calculated from the steps/mm defined in M8010. The difference between sensor read 0 and software z=0. It is exactly what you are temporarily setting when you press the z=0 button. Setting it in Gcode makes the setting static . You are absolutely correct that changing 8010 would be a nightmare, but this is not what was stated. I don't want a stepper without a spring because it is there to protect the screen. This is just basic printer calibration. Thank you and goodbye.

You are certainly right, I didn´t read attentive enough. (although I certainly did learn how to, already)

Skimming such big a text on an already solved problem I overlooked that you basically described how to unlock the "set-zero" function as is already known.
It´s up to you, to use the button or a fixed offset,. There are people out there who use a 3D-printed PETG taper bushing
instead of the insane rigid metal one and hence prefer the button.
There are also good reasons to level and determine "zero" below the sensor-zero. No pressure on the display while leveling in any case e.g.
Whereas the spring washer is not much protection with it´s 1-1,5mm when it really comes that a part falls of the built-plate.

But whatsoever, there´s a workaround, no matter with or without fixed offset.
Elegoo also provides a motor the same style as the newer printers are equipped and people have been happy with both ever since...
Pretty sure I already have the newer motor. My springs  are strong, which is also why this probably doesn't make as much sense to me. People talking about the viscosity of the fluid causing inaccuracy really was making me wonder how because you really have to push on mine to get any play. Mine is almost brand new. Its an "M10xxxxx" model.
Reply


Messages In This Thread
Z Axis Height Calibration - by admin - 10-16-2019, 11:56 AM
RE: Z Axis Height Calibration - by CPatrick - 10-17-2019, 04:46 AM
RE: Z Axis Height Calibration - by admin - 10-17-2019, 11:18 AM
RE: Z Axis Height Calibration - by oeildefaucon - 11-02-2019, 03:06 AM
RE: Z Axis Height Calibration - by Blackbird2016 - 11-02-2019, 10:33 AM
RE: Z Axis Height Calibration - by oeildefaucon - 11-03-2019, 04:12 AM
RE: Z Axis Height Calibration - by marsman - 10-17-2019, 03:16 PM
RE: Z Axis Height Calibration - by admin - 10-17-2019, 03:52 PM
RE: Z Axis Height Calibration - by admin - 10-18-2019, 08:08 AM
RE: Z Axis Height Calibration - by Woodvaper - 10-18-2019, 10:57 AM
RE: Z Axis Height Calibration - by CPatrick - 10-20-2019, 08:02 AM
RE: Z Axis Height Calibration - by Blackbird2016 - 10-20-2019, 10:56 AM
RE: Z Axis Height Calibration - by admin - 10-20-2019, 10:57 AM
RE: Z Axis Height Calibration - by mckeemorology - 10-21-2019, 07:48 AM
RE: Z Axis Height Calibration - by Blackbird2016 - 10-21-2019, 09:45 AM
RE: Z Axis Height Calibration - by SpaceDandy - 11-14-2019, 10:12 AM
RE: Z Axis Height Calibration - by Blackbird2016 - 11-14-2019, 10:33 AM
RE: Z Axis Height Calibration - by admin - 10-21-2019, 09:59 AM
RE: Z Achsenhöhenkalibrierung - by oeildefaucon - 10-29-2019, 01:00 PM
RE: Z Axis Height Calibration - by tbdad - 10-25-2019, 09:46 PM
RE: Z Axis Height Calibration - by admin - 10-26-2019, 12:18 AM
RE: Z Axis Height Calibration - by tbdad - 10-26-2019, 07:10 PM
RE: Z Axis Height Calibration - by PolymerChecker - 10-26-2019, 05:18 AM
RE: Z Axis Height Calibration - by admin - 10-26-2019, 02:19 PM
RE: Z Axis Height Calibration - by Marc_H - 10-26-2019, 08:41 AM
RE: Z Axis Height Calibration - by Marc_H - 10-26-2019, 10:21 AM
RE: Z Axis Height Calibration - by PolymerChecker - 10-26-2019, 04:16 PM
RE: Z Axis Height Calibration - by admin - 10-26-2019, 09:22 PM
RE: Z Axis Height Calibration - by tbdad - 10-27-2019, 01:41 AM
RE: Z Axis Height Calibration - by twoheadedboy - 11-01-2019, 02:19 PM
RE: Z Axis Height Calibration - by OscarW - 11-03-2019, 04:15 AM
RE: Z Axis Height Calibration - by oeildefaucon - 11-03-2019, 06:25 AM
RE: Z Axis Height Calibration - by OscarW - 11-03-2019, 08:10 AM
RE: Z Axis Height Calibration - by Blackbird2016 - 11-03-2019, 10:33 AM
RE: Z Axis Height Calibration - by OscarW - 11-04-2019, 11:27 AM
RE: Z Axis Height Calibration - by bennymcl - 11-07-2019, 08:14 PM
RE: Z Axis Height Calibration - by PolkCountyMike - 11-08-2019, 07:19 AM
RE: Z Axis Height Calibration - by bennymcl - 11-08-2019, 07:50 AM
RE: Z Axis Height Calibration - by PolkCountyMike - 11-09-2019, 08:21 AM
RE: Z Axis Height Calibration - by admin - 11-12-2019, 01:58 AM
RE: Z Axis Height Calibration - by fotolub - 11-12-2019, 06:10 PM
RE: Z Axis Height Calibration - by admin - 11-12-2019, 10:31 PM
RE: Z Axis Height Calibration - by admin - 11-14-2019, 01:52 PM
RE: Z Axis Height Calibration - by SpaceDandy - 11-15-2019, 07:25 AM
RE: Z Axis Height Calibration - by admin - 11-15-2019, 11:19 AM
RE: Z Axis Height Calibration - by Snassek - 11-20-2019, 06:01 PM
RE: Z Axis Height Calibration - by usergoo - 12-02-2019, 08:40 AM
RE: Z Axis Height Calibration - by Blackbird2016 - 12-02-2019, 10:51 AM
RE: Z Axis Height Calibration - by usergoo - 12-02-2019, 11:48 AM
RE: Z Axis Height Calibration - by Blackbird2016 - 12-03-2019, 12:21 AM
RE: Z Axis Height Calibration - by usergoo - 12-03-2019, 09:54 AM
RE: Z Axis Height Calibration - by geg81 - 01-18-2020, 10:14 AM
RE: Z Axis Height Calibration - by SnyggJohan - 01-19-2020, 02:04 AM
RE: Z Axis Height Calibration - by admin - 01-19-2020, 03:35 AM
RE: Z Axis Height Calibration - by tbuske - 02-20-2020, 03:52 PM
RE: Z Axis Height Calibration - by Michael - 02-29-2020, 12:48 AM
RE: Z Axis Height Calibration - by zace66 - 05-16-2020, 02:17 AM
RE: Z Axis Height Calibration - by marketmaster - 05-28-2020, 12:58 PM
RE: Z Axis Height Calibration - by Kirk444 - 03-19-2021, 06:58 PM
RE: Z Axis Height Calibration - by Dominic Ko - 10-17-2021, 10:30 PM
RE: Z Axis Height Calibration - by Aingree - 11-30-2021, 08:37 PM
RE: Z Axis Height Calibration - by rfresh737 - 05-21-2022, 03:10 PM
RE: Z Axis Height Calibration - by hmida01 - 12-04-2022, 05:25 AM

Forum Jump:


Users browsing this thread: 3 Guest(s)