Problem with objects curving during printing

[OscarW]

If  print small object it's ok, but it's print medium model i have many problem: first problem is the object that the base of the object is deformed and curved so that the base comes off causing the deformation of the part

I have print millemium condor starwars with support and raft and object are curved, if i print a cube 20mm/20mm without support, the base of cube is curved and the top is linear


Use Resin elegoo Gray with default parameter and the local is at 20°c

A idea ?

[VDX]

... try with higher curing times for the base ...

Viktor

[Jacky Sinner]

...surface to print is too large at once, try to give it an angle so the printer have to deglue only reasonable layer

[Tiger18]

Did you ever find a solution to this? I am trying to print a very solid part that reorienting is a mute point since no matter which way you flip it it is going to have a very large cross section.