v4.3.2-LCDF / 1440x2560 /F2.13

[dexoide]

hi,

i just bought an elegoo mars from amazon and i have this firmware installed on it :
v4.3.2-LCDF / 1440x2560 /F2.13

i have issues in printing. the lcd doesn t mask anything.

i try to print the _Rook.cbddlp file on the usb stick and i slice an stl file with chitubox 1.6.2 and i got the same result.

i am wondering if there is an incompatibility between this firmware and the _Rook.cbddlp provided on the usb stick and/or with chitubox 1.6.2.

i add firmware, serial and result pics

regards
Dexoide

[fromFDMtoSLA]

did you try the exposure test? - is the rectangle shown?
i had the same behavior, and sometimes it worked, after i start the print process a second time (select model - go back ti file screen - select model again)

[dexoide]

yes, the self exposure works.
there is a new version of shitubox release the 16/01 CHITUBOX64Install_1.6.3.exe

i have made the upgrade, slice a model and it seems to be working.

[dexoide]

it look like the upgrade of chitubox solve my issue for now.