Posts: 7
Threads: 2
Joined: Feb 2020
Reputation:
0
I don't see it mentioned anywhere what a good height is for the rook. Just opening the file it defaults to 24mm which seems rather small to me. I was thinking around 45mm but wondering what's optimal for the first test? I'm trying to get my first print right.
Posts: 238
Threads: 10
Joined: Dec 2019
Reputation:
8
02-05-2020, 12:43 AM
(This post was last modified: 02-05-2020, 12:47 AM by fromFDMtoSLA.)
24mm height is the original from the USB-stick. if you like it "bigger", you can scale it. i printed the Rook first time after setting up the printer and i used the presliced (*.cbddlp) from the stick, to be shure to slice/print in the right settings.
it's also a "reference".if you get some trouble with the printer and have to contact the Elegoo-support, you can show them pictures of the "reference-print".
Posts: 238
Threads: 10
Joined: Dec 2019
Reputation:
8
02-05-2020, 10:47 AM
(This post was last modified: 02-05-2020, 10:48 AM by fromFDMtoSLA.)
hey, you caught me ;-) i opened the stl to get the dimensions
the presliced-version is about 50mm in height
sorry for the misinformation