Posts: 1
Threads: 1
Joined: Feb 2020
Reputation:
0
I've been having zero luck recently with anything that I attempt to print using supports. I'm mainly trying to mini's, and the bottom supports print fine, but as soon as it begins to print the base, it ends up sticking to the FEP film.
Every single time.
Even after cleaning the tank, the film, it still happens.
Suggestions, recommendations?
Thanks!
Posts: 238
Threads: 10
Joined: Dec 2019
Reputation:
8
02-27-2020, 06:58 PM
(This post was last modified: 02-27-2020, 07:06 PM by fromFDMtoSLA.)
please give more "input":
- what resin
- which slicer & version#
- exposure- time- settings (bottom & normal)
- *.stl of the model
- slicer-output (print-) file to see the supports
- picture of faulty print
Posts: 25
Threads: 0
Joined: Nov 2019
Reputation:
0
Are you using "ball" interfaces for supports? For some reason, they don't work for me at all (not displayed or printed), and the print won't be connected to the supports much, if at all.
If that's not the case, try different support sizes (medium, heavy...) light ones can be rather bendy on defaults...
