03-29-2020, 12:31 PM
All,
Has anyone seen this one.
Elegoo Mars (09)
System: ChiTu L 5.5 Series
Version: V4.2.20.3_LCDE/1440x2560 /F2.9
After loading up a model and hitting the print button I received:
LCD error code: T_100 L_10. please try to continue printing. Confirm
The print bed will move up like it was paused and the only thing you can do is hit the play button again, receive the same error or go back.
Tried multiple models just to ensure I didn't get a back slice.
About the only thing I can find is in relation to the EPAX and the Photon and both had the LCD or LCD controller on the mainboard listed as possibly bad.
Has anyone seen this one.
Elegoo Mars (09)
System: ChiTu L 5.5 Series
Version: V4.2.20.3_LCDE/1440x2560 /F2.9
After loading up a model and hitting the print button I received:
LCD error code: T_100 L_10. please try to continue printing. Confirm
The print bed will move up like it was paused and the only thing you can do is hit the play button again, receive the same error or go back.
Tried multiple models just to ensure I didn't get a back slice.
About the only thing I can find is in relation to the EPAX and the Photon and both had the LCD or LCD controller on the mainboard listed as possibly bad.