New printer, seems to work, but nothing printed

[dusmmdb]

I scanned for a similar thread but cant seem to locate one....

I bought a brand new Mars, downloaded chitubox and followed the setup.  I received a file from a friend, ran it thru chitubox, added several supports, and sliced.  Everything seems fine.  The Mars said it would be a 10 hour print.  I watched for a bit and it seemed to be working fine.

This morning it was done, but nothing was on the plate.  The glass of the vat did have a thin layer of the "outline" of the file that was to be printed.

advice??

[fromFDMtoSLA]

- correct leveling ?
- try the presliced "Rook" from the USB-stick
- show us the result and the settings for you "10 hour print"

[dusmmdb]

- correct leveling ?
- try the presliced "Rook" from the USB-stick
- show us the result and the settings for you "10 hour print"

I did the leveling as illustrated in the manual and I watched a few videos... felt flush against the paper on all corners.  I will try the rook as soon as I get home and take pics of the file.  Thanks

[dusmmdb]

Must be my settings for the file that I received. The rooks printed just fine

[fromFDMtoSLA]

sound's good ;-)
if you like, we can have a look on your "big" file

[dusmmdb]

sound's good ;-)
if you like, we can have a look on your "big" file

here is the file

hmm... im hitting add attachment, but it doesnt appear to be adding it. it says the type of file is not allowed