I've tried everything to get test took to stick!!!

[Umpa]

I am curious if that worked for the OP.

[AeRo0]

I am curious if that worked for the OP.

Honestly I think my problem was with the 3dJake resin that I have. I had gotten two colors, grey and dark blue. For some reason I can't get the grey to print, I've gotten several good prints from the blue resin. Once I run out of it, I'll try a different type of resin, either Elegoo or Siraya Tech if I can find it here in Europe.

[cliffyk]

I have not been thrilled by the printing or final product characteristics of any grey resin and have come to not consider them when buying..