08-06-2020, 02:05 AM
how to adjust leveling speed? on first mars i can config that in file. on PRO taht function locked. i want to down speed and cant take that. from chitu speed changes but with no reason. becouse - first 2mm up with higher speed, then speed drops to parameters from chitu, then go down with speed from chitu, on last 2mm again get higher speed. i think that not cool.
Question is - how to do= when buildplate up - speed 48-60mm , then retract on 150mm, then go down again 48-60mm. like on other printers like nova or longer.
Question is - how to do= when buildplate up - speed 48-60mm , then retract on 150mm, then go down again 48-60mm. like on other printers like nova or longer.