08-09-2020, 12:01 PM
(This post was last modified: 08-09-2020, 12:02 PM by sujitvasanth.)
Just for info
If you have a hole in your last FEP film this will keep you printing for weeks longer...
empty out the VAT and velae with isopropyl acohol.
pay particular attension to the metal vat edges as these provide the stckiness
use overlapping strips of sticky tape on the underside of the VAT
dont bother putting any on the upper side as it just sticks to the print sa it gets pulled with every layer!
If you have a hole in your last FEP film this will keep you printing for weeks longer...
empty out the VAT and velae with isopropyl acohol.
pay particular attension to the metal vat edges as these provide the stckiness
use overlapping strips of sticky tape on the underside of the VAT
dont bother putting any on the upper side as it just sticks to the print sa it gets pulled with every layer!