vanashing supports

[Eternalgore911]

i would appreciate good support settings or an explanation  why only the middle for my supports are missing. im running an older version of chitubox bc that was the only version that the machine would read properly can that be fixed also..chitubox version 1.6.2 or is there a better slicer

[DDV]

i would appreciate good support settings or an explanation  why only the middle for my supports are missing. im running an older version of chitubox bc that was the only version that the machine would read properly can that be fixed also..chitubox version 1.6.2 or is there a better slicer

You can get Chitubox 1.8.1 here: https://www.chitubox.com/en/download/chitubox-free

[Eternalgore911]

i would appreciate good support settings or an explanation  why only the middle for my supports are missing. im running an older version of chitubox bc that was the only version that the machine would read properly can that be fixed also..chitubox version 1.6.2 or is there a better slicer

You can get Chitubox 1.8.1 here: https://www.chitubox.com/en/download/chitubox-free

im still getting odd support fails after updating to the latest version of chitubox ,its not running in a cold room, and its level, any advise?

[cliffyk]

What exposure and other print settings? Chitubox's default exposure times for the Pro are overly optimistic--try increasing the normal layer exposure by 20 to 25% (maybe even 30 to 35%)...