Elegoo 3D Printers Forum › Elegoo Mars 3D Printer › Getting Started v
Check Printer setting on Chitubox startup!

 
Thread Rating:
  • 0 Vote(s) - 0 Average
Thread Modes
Check Printer setting on Chitubox startup!
JoePeacock Offline
Junior Member
**
Posts: 5
Threads: 2
Joined: Jul 2019
Reputation: 0
#1
07-18-2019, 02:29 PM
BE SURE that when you open Chituboxthat you check under setting that you have the Elegoo Mars set as the printer.  If you don't everything will come out skewed and wonky jawed.
Find
Reply
CollinsA Offline
Junior Member
**
Posts: 12
Threads: 3
Joined: Sep 2019
Reputation: 0
#2
09-06-2019, 06:50 AM
JoePeacock Wrote:BE SURE that when you open Chituboxthat you check under setting that you have the Elegoo Mars set as the printer.  If you don't everything will come out skewed and wonky jawed.
Joe,

Running V1.5.0 and under settings for machine type there is no option for selection. mine is simply set to (default) This applies to the name as well. Any ideas?

Thanks
Find
Reply
MarkE Offline
Junior Member
**
Posts: 1
Threads: 0
Joined: Sep 2019
Reputation: 0
#3
09-07-2019, 06:44 AM
(09-06-2019, 06:50 AM)CollinsA Wrote: Running V1.5.0 and under settings for machine type there is no option for selection. mine is simply set to (default) This applies to the name as well. Any ideas?

Left hand side of the Settings page, above where it says Default, there's a button to add a new printer. Click this and pick Elegoo Mars from the list to create a new machine, which will now appear underneath the Default printer.
Find
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)