Network on Saturn S

[StonehengeFR]

Hello all
I’ve just bought the new Saturn S and very disappointed to see that they ditch eth. port.
My printer will be 5 stairs beneath me in my garage … how can I remote control it?

Thanks a lot.

[billtodd]

Hello all
I’ve just bought the new Saturn S and very disappointed to see that they ditch eth. port.
My printer will be 5 stairs beneath me in my garage … how can I remote control it?

Thanks a lot.

Frankly, the old Saturn Ethernet port had very little utility : it could only download a file to the usb stick and start the print , no monitoring etc.

My printer is only one flight of stairs away , but I have learned (by repeated climbs) to prep the files before the printer and then stay at the printer long enough to here the  tearing of the first layer , before climbing the stairs again back to the office.

A camera (with sound - so any rattling or stalled Z motor can be detected ) would be useful .

[StonehengeFR]

Hello,

Thanks for your input. Since my first post, I've found something similar to octoprint (but less versatile) for the Saturn (not sur if it work for the "S" version tho) :

https://www.reddit.com/r/ElegooMars/comm...ner_samba/

You can find even more details here with the Mars pro as an example : https://l9o.dev/posts/controlling-an-ele...-remotely/

Source code : https://github.com/luizribeiro/mariner

I wonder if anyone as already try this whith the "S" version and/or a Raspberry PI 3...

[billtodd]

Thanks, that looks interesting :-)