|
mixing resins
|
08-07-2021, 09:01 AM
hi all just a quick question i am using water washable resin from elegoo i have some gray and blue not enough to make a print can i mix the resins so i can do the print without any problems
thanks mike
08-09-2021, 01:20 PM
I do mix different resins. Shouldn't be a problem. However, the exposure times might need to be adjusted. I normally just pick something in between of the exposure times of the resins I mix, but depending on the level of detail you expect, or the complexity/stability of your model you might want to do a calibration print first to find the proper exposure time for the mix.
08-10-2021, 03:20 AM
(08-09-2021, 01:20 PM)mzanetti Wrote: I do mix different resins. Shouldn't be a problem. However, the exposure times might need to be adjusted. I normally just pick something in between of the exposure times of the resins I mix, but depending on the level of detail you expect, or the complexity/stability of your model you might want to do a calibration print first to find the proper exposure time for the mix.a big thanks will try a print mike |
|
« Next Oldest | Next Newest »
|
