Hello,
I have ran several prints now of misc organic characters / miniatures and the sample files provided with my Mars 2 and they look great but when i trie to print a basic cylindrical object (its a threaded container) it is coming out terrible looking.
Can anyone shed some light in this for me? Should I always print at an angle and force supports to be used?
I am printing it flat on the build platform so I dont end up needing support material but I have also tried printing and an angle and i am getting ridges and imperfections on the print.
Images attached:
![[Image: Screen%20Shot%202021-06-25%20at%2011.37.49%20PM.png]](http://sideburn.com/elegoo/Screen%20Shot%202021-06-25%20at%2011.37.49%20PM.png)
![[Image: Screen%20Shot%202021-06-25%20at%2011.24.54%20PM.png]](http://sideburn.com/elegoo/Screen%20Shot%202021-06-25%20at%2011.24.54%20PM.png)
![[Image: Screen%20Shot%202021-06-25%20at%2011.37.19%20PM.png]](http://sideburn.com/elegoo/Screen%20Shot%202021-06-25%20at%2011.37.19%20PM.png)
I have ran several prints now of misc organic characters / miniatures and the sample files provided with my Mars 2 and they look great but when i trie to print a basic cylindrical object (its a threaded container) it is coming out terrible looking.
Can anyone shed some light in this for me? Should I always print at an angle and force supports to be used?
I am printing it flat on the build platform so I dont end up needing support material but I have also tried printing and an angle and i am getting ridges and imperfections on the print.
Images attached: