Elegoo Saturn will not Print - Printable Version +- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum) +-- Forum: Elegoo Mars Pro 3D Printer (https://www.elegoomars.com/forum/forumdisplay.php?fid=27) +--- Forum: Getting Started (https://www.elegoomars.com/forum/forumdisplay.php?fid=28) +--- Thread: Elegoo Saturn will not Print (/showthread.php?tid=1130) |
Elegoo Saturn will not Print - trgrassijr55 - 05-07-2022 Hello I am new to the 3D printing world I am a Model Railroader and found a great new to have items made with a 3D printer. SO I just received my first 3D Resin Printer Elegoo Saturn. Was very excided when it arrived. I carefully removed it from the packaging. Followed the east to read instructions and got to the Test Printing page I copied a .gcode file from my computer that a friend gave me to the USB drive that was provided. I selected Print and found the file I added to the USB and then started to printing. That started yesterday at 9:40 PM was sitting at 1 % until I went to bed around 11:30 PM when i woke up today the screen showed the Print Job has Completed time 8 hrs 20 min. I took the cover off and saw no object The build plate never moved. I then went into tools and manually moved the build plate I left it at the very top this time and it still did not move into the resin. Any one know what I am doing wrong here? I hope this is enough information Let me know if you required additional info I am going to see about getting the firmware updated next. Hello ALL I got it working. I leveled the Build Plate again followed a Youtube video guy did extra steps not in the manual Then I choose a file supplied on the USB drive and now it is printing already at 3 % Last night stayed at 1% for hours. The file I was trying to print was a gcode type file so I am going to use GHITUBOX software and slice the gcode file and see if that will print it. Thanks RE: Elegoo Saturn will not Print - trgrassijr55 - 05-08-2022 Hello everyone Still not able to print? Do not understand why I waste time on this. This time a took a file spliced it and saved it as a CTB file CHITUBOX says it will take 45 minutes to print Yes it stopped in 45 minutes but nothing printed The build plate moved to the top of the z axis and under the plate was nothing. Does someone have a file they can send me that they know works on this printer? Thank you |