Having trouble printing miniature bases - Printable Version +- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum) +-- Forum: Elegoo Mars 3D Printer (https://www.elegoomars.com/forum/forumdisplay.php?fid=1) +--- Forum: Maintenance & How-To (https://www.elegoomars.com/forum/forumdisplay.php?fid=10) +--- Thread: Having trouble printing miniature bases (/showthread.php?tid=1219) |
Having trouble printing miniature bases - Mishenka - 08-10-2022 I'm having trouble printing a miniature base on my Mars 2 Pro. The base is around 50mm in diameter and has some features on the bottom (so I can't just print it flat on the plate). I first tried printing it flat with supports underneith. This almost worked, but supports failed one side of the base. I then made 2 attempts printing it rotated ~45deg with various amount of supports and both times the supports failed early on and the base detached from them. I haven't tried printing with 90deg rotation yet. I wanted to know how people are dealing with printing bases and what has worked best for you. Thanks. |