v4.3.2-LCDF / 1440x2560 /F2.13 - Printable Version +- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum) +-- Forum: Elegoo Mars 3D Printer (https://www.elegoomars.com/forum/forumdisplay.php?fid=1) +--- Forum: Firmware Updates (https://www.elegoomars.com/forum/forumdisplay.php?fid=3) +--- Thread: v4.3.2-LCDF / 1440x2560 /F2.13 (/showthread.php?tid=330) |
v4.3.2-LCDF / 1440x2560 /F2.13 - dexoide - 01-18-2020 hi, i just bought an elegoo mars from amazon and i have this firmware installed on it : v4.3.2-LCDF / 1440x2560 /F2.13 i have issues in printing. the lcd doesn t mask anything. i try to print the _Rook.cbddlp file on the usb stick and i slice an stl file with chitubox 1.6.2 and i got the same result. i am wondering if there is an incompatibility between this firmware and the _Rook.cbddlp provided on the usb stick and/or with chitubox 1.6.2. i add firmware, serial and result pics regards Dexoide RE: v4.3.2-LCDF / 1440x2560 /F2.13 - fromFDMtoSLA - 01-18-2020 did you try the exposure test? - is the rectangle shown? i had the same behavior, and sometimes it worked, after i start the print process a second time (select model - go back ti file screen - select model again) RE: v4.3.2-LCDF / 1440x2560 /F2.13 - dexoide - 01-18-2020 yes, the self exposure works. there is a new version of shitubox release the 16/01 CHITUBOX64Install_1.6.3.exe i have made the upgrade, slice a model and it seems to be working. RE: v4.3.2-LCDF / 1440x2560 /F2.13 - dexoide - 01-18-2020 it look like the upgrade of chitubox solve my issue for now. |