+- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum)
+-- Forum: Elegoo Mars 3D Printer (https://www.elegoomars.com/forum/forumdisplay.php?fid=1)
+--- Forum: Getting Started (https://www.elegoomars.com/forum/forumdisplay.php?fid=2)
+--- Thread: Optimal Rook Height (/showthread.php?tid=361)
Optimal Rook Height - FrozT - 02-04-2020
I don't see it mentioned anywhere what a good height is for the rook. Just opening the file it defaults to 24mm which seems rather small to me. I was thinking around 45mm but wondering what's optimal for the first test? I'm trying to get my first print right.
RE: Optimal Rook Height - fromFDMtoSLA - 02-05-2020
24mm height is the original from the USB-stick. if you like it "bigger", you can scale it. i printed the Rook first time after setting up the printer and i used the presliced (*.cbddlp) from the stick, to be shure to slice/print in the right settings.
it's also a "reference".if you get some trouble with the printer and have to contact the Elegoo-support, you can show them pictures of the "reference-print".
RE: Optimal Rook Height - FrozT - 02-05-2020
(02-05-2020, 12:43 AM)fromFDMtoSLA Wrote: 24mm height is the original from the USB-stick. if you like it "bigger", you can scale it. i printed the Rook first time after setting up the printer and i used the presliced (*.cbddlp) from the stick, to be shure to slice/print in the right settings.OK, I'm just surprised by that, it's height then will be barely the width of my thumb. Most of the pictures I've seen online they are around the width of 3 fingers high in the images.
it's also a "reference".if you get some trouble with the printer and have to contact the Elegoo-support, you can show them pictures of the "reference-print".
RE: Optimal Rook Height - fromFDMtoSLA - 02-05-2020
hey, you caught me ;-) i opened the stl to get the dimensions
the presliced-version is about 50mm in height
sorry for the misinformation
RE: Optimal Rook Height - FrozT - 02-06-2020
(02-05-2020, 10:47 AM)fromFDMtoSLA Wrote: hey, you caught me ;-) i opened the stl to get the dimensions
the presliced-version is about 50mm in height
sorry for the misinformation
ahh, I see. OK, so the pre-sliced sample is already 50mm. That makes more sense now. Thanks.
RE: Optimal Rook Height - VDX - 02-10-2020
... I'm eventually testing the parameters by reducing the size
[attachment=116]
Viktor