+- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum)
+-- Forum: Elegoo Mars 3D Printer (https://www.elegoomars.com/forum/forumdisplay.php?fid=1)
+--- Forum: Getting Started (https://www.elegoomars.com/forum/forumdisplay.php?fid=2)
+--- Thread: I've tried everything to get test took to stick!!! (/showthread.php?tid=517)
Pages:
1
2
RE: I've tried everything to get test took to stick!!! - Umpa - 07-21-2020
I am curious if that worked for the OP.
RE: I've tried everything to get test took to stick!!! - AeRo0 - 07-21-2020
(07-21-2020, 01:21 PM)Umpa Wrote: I am curious if that worked for the OP.Honestly I think my problem was with the 3dJake resin that I have. I had gotten two colors, grey and dark blue. For some reason I can't get the grey to print, I've gotten several good prints from the blue resin. Once I run out of it, I'll try a different type of resin, either Elegoo or Siraya Tech if I can find it here in Europe.
RE: I've tried everything to get test took to stick!!! - cliffyk - 07-21-2020
I have not been thrilled by the printing or final product characteristics of any grey resin and have come to not consider them when buying..