Elegoo Washable resin--Useless... - Printable Version +- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum) +-- Forum: Elegoo Mars 3D Printer (https://www.elegoomars.com/forum/forumdisplay.php?fid=1) +--- Forum: Maintenance & How-To (https://www.elegoomars.com/forum/forumdisplay.php?fid=10) +--- Thread: Elegoo Washable resin--Useless... (/showthread.php?tid=664) |
Elegoo Washable resin--Useless... - cliffyk - 10-16-2020 The thought of washing up with water had great appeal, however I find that after final curing the finished product is so brittle as to be worthless for any model having finer details (or even not that fine). As an example I had planned on printing up a number of "Jack -O Covids" (see photo) for the grandchildren--however once complete i found them so brittle as to be totally unsuitable for anything to be given to a child--even 8-year-olds having brains enough to not eat their toys. The prints are so brittle that even a good strong look will break off the projecting thingys (I don't know what they are called). I have also found that during final curing--be it in sunlight or forced via a 30 W 405 nm LED--any junctures such as that at the Covid's "pods" to body juncture--will develop stress fractures, an almost crystalline structure, causing the models to literally burst apart while being cured. I will NOT be buying it again. RE: Elegoo Washable resin--Useless... - Gauntfield - 10-19-2020 YUCK thats awful, ill stick to regular resin and my IPA wash. Thanks for testing it out Cliffyk!!! RE: Elegoo Washable resin--Useless... - cliffyk - 10-19-2020 I must note that I was contacted by Elegoo after my less than flattering review on Amazon, they have offered to send me a bottle of resin (my selection) as way of compensation/replacement. That's pretty damned good customer service! RE: Elegoo Washable resin--Useless...[update] - cliffyk - 11-15-2020 Thought I'd provide an update on this crap. Here's a fitting I made for the chlorine injection tank on our water system as it looked on 10/27/2020 when I made it: Here it is just 13 days later on 11/09/2020: In use it was exposed to sunlight for 4 to 5 hiurs a day, daylight for 9 to 10 hours. The chemical tank holds diluted household bleach (6%), 1 gallon bleach to 14 gallons water--nothing but water passes through this filler elbow. No excessive stress or strain; it just seemed to swell up and explode. I made another today using the Elegoo standard resin they provided (Elegoo has great "customer is always right" support!!!) after I complained about the water washable junk-I'll report again in a couple weeks. To tell the truth I am becoming disillusioned in the utility of resin printed mechanical components--when the FDM crowd decries SLA prints as "brittle" and "unreliable" I am becoming convinced they are correct and all we can do is hang our heads in shame--but that's all for a new thread I have planned... RE: Elegoo Washable resin--Useless... - cliffyk - 12-08-2020 Update: The elbow adapter I made with the plain ol' IPA cleanup standard resin looks just fine after 22 days of identical service... [update 01/28/2021] 2 months and 10 days service and the IPA resin version of the elbow is still going strong... [/update] |