Latest Mars Firmware Release - V4.2.19_LCDM /1440x2560 /F2.7
|
I have the same issue firmare is 4.3.1_LCDF and serial number is M1420191102-C, so Batch 14? and made in 2019?
07-18-2020, 03:54 PM
(07-17-2020, 02:27 PM)Hywel Wrote:(07-17-2020, 02:21 PM)TheGadge Wrote:That button is on the regular Mars but is disabled so it’s not user changeable.(07-17-2020, 02:18 PM)Hywel Wrote:(07-17-2020, 02:12 PM)TheGadge Wrote:Ah! Well I did do that - multiple times now to level the build plate on 1, 2 and 3 pieces of paper. It always levels/homes perfectly, but then when I print it does this wierd grind thing. Just to make this extra weird, it only happens on SOME prints, not all. I thought it was an issue with the new Chitubox slicer and went back to my older version but that was a red herring it'd seem. Thanks for the suggestions!(07-17-2020, 02:09 PM)Hywel Wrote: I thought Z offset was set by doing the home the plate method (with a piece of paper) no? On the regular Mars you cant manually set Z=0?? See my post here about the "Z=0" function...
07-18-2020, 04:15 PM
(07-18-2020, 03:54 PM)cliffyk Wrote:Thanks, that’s very helpful, alas my Mars is a regular one, not a Pro and that function is disabled on the regular Mars(07-17-2020, 02:27 PM)Hywel Wrote:(07-17-2020, 02:21 PM)TheGadge Wrote:That button is on the regular Mars but is disabled so it’s not user changeable.(07-17-2020, 02:18 PM)Hywel Wrote: Ah! Well I did do that - multiple times now to level the build plate on 1, 2 and 3 pieces of paper. It always levels/homes perfectly, but then when I print it does this wierd grind thing. Just to make this extra weird, it only happens on SOME prints, not all. I thought it was an issue with the new Chitubox slicer and went back to my older version but that was a red herring it'd seem. Thanks for the suggestions!
07-18-2020, 05:33 PM
(07-18-2020, 04:15 PM)Hywel Wrote: Thanks, that’s very helpful, alas my Mars is a regular one, not a Pro and that function is disabled on the regular Mars My series "M20xxx" plain ol' Mars as a working (as described in my linked post) "Z=0" function. What series (first 3 characters of the s/n) is yours? What firmware version is it?
07-18-2020, 06:15 PM
(07-18-2020, 05:33 PM)cliffyk Wrote:M172; I upgraded to to V4.3.4 LCDF, which was posted here recently. I’m thinking this might be related, which is why I’m trying to find a good build to go back to.(07-18-2020, 04:15 PM)Hywel Wrote: Thanks, that’s very helpful, alas my Mars is a regular one, not a Pro and that function is disabled on the regular Mars (07-18-2020, 06:15 PM)Hywel Wrote: M172; I upgraded to to V4.3.4 LCDF, which was posted here recently. I’m thinking this might be related, which is why I’m trying to find a good build to go back to. The good news is that the "Z=0" function really doesn't do anything necessary, perhaps that's why it's disabled in the 4.3.4 firmware you loaded. If you have not read my post (here, the conclusion of my email exchanges with Elegoo support), please do so--you will see that you are not missing much, if anything, by it's absence...
01-05-2021, 12:37 PM
(This post was last modified: 01-05-2021, 12:39 PM by clearchrome.)
I have the serial M192xxxxx302 , which Model do I have?? M01? Which firmware should I use?
System ChiTu L 5.5 Series My current (original) fw is V4.3.2_CFDF / 1440x2560 / F2.13
01-05-2021, 04:25 PM
(01-05-2021, 12:37 PM)clearchrome Wrote: I have the serial M192xxxxx302 , which Model do I have?? M01? Which firmware should I use? Your model (actually "release/version/series") is an "M19". 4.3.4 is the latest publiclly released by Elegoo--you can download it here. However there is no real need to update as it is the same binary as your 4.3.2 version--it's just a relabelled public release of the that production firmware... |
« Next Oldest | Next Newest »
|
Users browsing this thread: 1 Guest(s)