02-16-2022, 11:57 AM
In the machine .gcode configuration file there is a code M8489 Pn labeled as "Action after printing is completed"--on my plain ol' Mars it is set to P3 "After the printing is completed, it drops [rises for a resin printer] to the maximum stroke of Z, and the [fan] motor is continuously powered.".
I found a Saturn .gcode file from February, 2020 on which it is set to P1 "Does not work after printing"--depending on how you translate "Chinglish" ths may mean it does nothing, but stop.
Do you have a .gcode file for your printer?
I found a Saturn .gcode file from February, 2020 on which it is set to P1 "Does not work after printing"--depending on how you translate "Chinglish" ths may mean it does nothing, but stop.
Do you have a .gcode file for your printer?