Are you sure you got the correct firmware package for your printer? Apparently there are three types of LCDs used in the Saturn--a type "PJL", type "PJ V5" and a type "TM".
Which you have can be determined by the 12th and 13th digits of the printer's serial number as shown below:
==================================================================
![[Image: SaturnScreenTypeBySN.png]](http://www.paladinmicro.com/images/EleGoo-Etc/SaturnScreenTypeBySN.png)
==================================================================
Which you have can be determined by the 12th and 13th digits of the printer's serial number as shown below:
==================================================================
==================================================================
![[Image: 816-20120803-wide800.jpg]](http://www.paladinmicro.com/images/ForumPosts/816-20120803-wide800.jpg)