07-18-2020, 03:54 PM
(07-17-2020, 02:27 PM)Hywel Wrote:(07-17-2020, 02:21 PM)TheGadge Wrote:That button is on the regular Mars but is disabled so it’s not user changeable.(07-17-2020, 02:18 PM)Hywel Wrote:(07-17-2020, 02:12 PM)TheGadge Wrote:Ah! Well I did do that - multiple times now to level the build plate on 1, 2 and 3 pieces of paper. It always levels/homes perfectly, but then when I print it does this wierd grind thing. Just to make this extra weird, it only happens on SOME prints, not all. I thought it was an issue with the new Chitubox slicer and went back to my older version but that was a red herring it'd seem. Thanks for the suggestions!(07-17-2020, 02:09 PM)Hywel Wrote: I thought Z offset was set by doing the home the plate method (with a piece of paper) no? On the regular Mars you cant manually set Z=0??
Sorry for being dense here...
Thanks
you’re not being dense lol. I’m pretty new to mars too, but 4 years on fdm. It’s a classic with those that you need to reset ‘home’ when you upgrade firmware. So try that and see if the grinding has gone.
no worries. So, just to be clear, after homing, you can’t come back out of the ‘manual’ screen and click z=0 on the screen top right then?? I have that on my mars pro but I’m away from it at the mo.
See my post here about the "Z=0" function...