11-28-2020, 05:48 PM
The mirror-like surface finish on the Pro platen (build-plate) is just plain wrong--see my thread here--I don't knwo what Elegoo was thinking, unless they tested it with that damned useless "water washable" resin which likes the ultra-polished finish.
Roughen it up a bit with 400 or finer grit paper, or a scrub-pad ad some have done--your problem is not "Sticking to the FEP film", but rather "not sticking to the platen"...
Roughen it up a bit with 400 or finer grit paper, or a scrub-pad ad some have done--your problem is not "Sticking to the FEP film", but rather "not sticking to the platen"...