Raft and supports sticking to plate but print sticks to FEP

[cliffyk]

Increase the normal layer exposure by 20% to 25%.

Also, how old is your printer, or more specifically how many hours of printing has it performed? If more than 200 to 300 hours the LCD is probably on its last legs.

Download and slice this file (LCDTest.stl). Then "Print" it with the resin vat and build plate removed. It will "illuminate" the entire 120 x 68 mm field and let you evaluate the LCD and curing lamps. Place a sheet of copy paper over the LCD and take a photo--it should look like this if the LCD is clear:



If it's overall dim or you see spots and/or streaks as shown below the LCD needs to be replaced.



Post the photo so we can see it.