Greetings,
I have elegoo mars for 1 month, no problem printing for the past month.
Now, I have a problem printing.
Some models lacks a limb.
So, I change the resin, clean the bath and I adjust the axe Z with elegoo menu and a paper.
I have changed the support from thin to medium.
Now, I print another time with some models and I only have two of them. No resin polymerised in the bath and only two are well printed. The other are nowhere !
I
These is exposition time :
Mayer height 0.05
Bottom layer count : 8
Exposure time : 8
Bottom exposure time : 60
Bottom lift distance : 5 mm
Lifting distance : 5mm
Lifting speed : 65 mm/s
Retract speed : 150 mm
Resin : elegoo grey.
Thank you for your support.
I have elegoo mars for 1 month, no problem printing for the past month.
Now, I have a problem printing.
Some models lacks a limb.
So, I change the resin, clean the bath and I adjust the axe Z with elegoo menu and a paper.
I have changed the support from thin to medium.
Now, I print another time with some models and I only have two of them. No resin polymerised in the bath and only two are well printed. The other are nowhere !
I
These is exposition time :
Mayer height 0.05
Bottom layer count : 8
Exposure time : 8
Bottom exposure time : 60
Bottom lift distance : 5 mm
Lifting distance : 5mm
Lifting speed : 65 mm/s
Retract speed : 150 mm
Resin : elegoo grey.
Thank you for your support.