Elegoo Mars 3 touchscreen unresponsive after calibration

[Triandin]

Hi, I calibrated the screen with the specific option and the monitor no longer responds to touch. I tried to turn it off and on again but nothing. The printer is new, it only made 8 prints.

Please help,

Daniele

[evilned]

Hi, I calibrated the screen with the specific option and the monitor no longer responds to touch. I tried to turn it off and on again but nothing. The printer is new, it only made 8 prints.

Please help,

Daniele

---

Hi, I calibrated the screen with the specific option and the monitor no longer responds to touch. I tried to turn it off and on again but nothing. The printer is new, it only made 8 prints.

Please help,

Daniele

---

Hi mate, I know this is probably a little late for you. But I'll post the answer that fixed your problem when I encountered it.
I contacted elegoo support and they got back to me straight away with the solution below.
Hope this helps future people searching for a solution to this problem.
Very sorry for the late reply.
Please download the file linked below to the root directory of the U disk, then insert the U disk into the machine, and restart the machine, the machine will automatically update.
https://drive.google.com/file/d/1emA3l1c...sp=sharing
If the touch screen works, please update the firmware at the link below.
https://drive.google.com/file/d/1VykWL9D...sp=sharing