hi,
i just bought an elegoo mars from amazon and i have this firmware installed on it :
v4.3.2-LCDF / 1440x2560 /F2.13
i have issues in printing. the lcd doesn t mask anything.
i try to print the _Rook.cbddlp file on the usb stick and i slice an stl file with chitubox 1.6.2 and i got the same result.
i am wondering if there is an incompatibility between this firmware and the _Rook.cbddlp provided on the usb stick and/or with chitubox 1.6.2.
i add firmware, serial and result pics
regards
Dexoide
i just bought an elegoo mars from amazon and i have this firmware installed on it :
v4.3.2-LCDF / 1440x2560 /F2.13
i have issues in printing. the lcd doesn t mask anything.
i try to print the _Rook.cbddlp file on the usb stick and i slice an stl file with chitubox 1.6.2 and i got the same result.
i am wondering if there is an incompatibility between this firmware and the _Rook.cbddlp provided on the usb stick and/or with chitubox 1.6.2.
i add firmware, serial and result pics
regards
Dexoide