Posts: 3
Threads: 1
Joined: Aug 2019
Reputation:
0
every time I am going to print a screen appears with the following message
Different resolution with projector! -1440 and a confirm button
pulse disappears the message but the printer does nothing and gives me the same error with any model until the demo.
REGARDS
Posts: 97
Threads: 8
Joined: Jul 2019
Reputation:
15
Assuming you are using chitubox, have you selected the elegoo Mars printer profile?
Posts: 97
Threads: 8
Joined: Jul 2019
Reputation:
15
What version of chitubox?
Posts: 2
Threads: 0
Joined: Oct 2019
Reputation:
0
Hi, I encounter the same resolution-error, so I wanted to know if you were able to solve the problem?
With me the error happened like this:
New printer, calibrated everything like instructed in the manual and did 1 print two months ago: everything went perfect.
Now for my second print, I used a bigger model, with a piece of the bottom being "under" the build plate when I sliced it in Chitubox because it was a piece of rock I don't need, then 'fixed' with the proton file validator, then on the Elegoo USB and started printing without issues).
But when that print came on layer 2, it never went to layer 3 and gave an error. So I stopped the print. When I asked it to print the file again, it gave the resolution-error. On all the other files (the rook and my first print from two months ago, too) give this same error.
I hope this helps finding a solution...
(I always use the Elegoo Mars profile, Chitubox)
Posts: 2
Threads: 0
Joined: Oct 2019
Reputation:
0
I solved the error problem!
Resin back in the bottle, cleaned the VAT and build plate, followed the user manual from start (with calibration and testing) ...and it worked!