White resin prints fine but space grey doesn’t??

[Eni8ma]

Hello

I have a very strange issue with my printer I was hoping someone could point me to the right direction.

So I normally print with 2 resins, standard white and 8k space grey which were both working fine.

I have recently moved houses and the printer and after re leveling the printer I noticed the grey resin would fail on prints, I usually print 4 copies and 1 failed.

Now all 4 fail however the white resin prints all 4 fine. I use 2 different trays for each color I tried swapping them but same thing, I tried changing the fep, same thing. Multiple re leveling didn’t help and since the white prints fine I figured the leveling is good. 

Sometimes the grey resin prints half way, sometimes less but not fully. I tried increasing the cure time to 5 seconds from my usual 2.5 but no luck.

Any suggestions would be much appreciated!

I have a Mars 3 pro

Regards