02-05-2020, 12:43 AM
(This post was last modified: 02-05-2020, 12:47 AM by fromFDMtoSLA.)
24mm height is the original from the USB-stick. if you like it "bigger", you can scale it. i printed the Rook first time after setting up the printer and i used the presliced (*.cbddlp) from the stick, to be shure to slice/print in the right settings.
it's also a "reference".if you get some trouble with the printer and have to contact the Elegoo-support, you can show them pictures of the "reference-print".
it's also a "reference".if you get some trouble with the printer and have to contact the Elegoo-support, you can show them pictures of the "reference-print".