05-01-2020, 06:49 AM
(This post was last modified: 05-01-2020, 06:51 AM by unclefrank666.)
(05-01-2020, 06:46 AM)fromFDMtoSLA Wrote: "printed nothing only for very layer on the tank film" - you mean, there are some layers printed and sticking an the FEP?Yes sticking to the FEP
"On the Elegoo in the Exposure settings what should the exposure time be?" - depends on the resin - waht are your actual settings for the resin?
Resin is ABS-Like Photopolymer ||Resin Grey UV wavelength 405nm