Posts: 39
Threads: 0
Joined: Feb 2020
Reputation:
3
Also a heads up: That print really needs support. Tiny surface area that grows a lot is a recipe for failure. This is compounded by the cup formed. Also, the sudden shelf is likely to be distorted even if it manages to hang on. ( 0.05mm of half cured plastic isn't exactly known for its strength. )
Posts: 11
Threads: 3
Joined: May 2020
Reputation:
0
So I slice and I did some support. Still I cannot print.
Posts: 238
Threads: 10
Joined: Dec 2019
Reputation:
8
05-18-2020, 12:25 PM
(This post was last modified: 05-18-2020, 12:30 PM by fromFDMtoSLA.)
so, again: show/upload the sliced model/file - if you want some help, we need more info's (we can read them out of the sliced model)
Posts: 11
Threads: 3
Joined: May 2020
Reputation:
0
I could do all that.
But maybe you could explain why I need to do it to solve my m400 problem when the original free models from teh USB key dont even work.
Just want explanation
Posts: 238
Threads: 10
Joined: Dec 2019
Reputation:
8
05-18-2020, 11:13 PM
(This post was last modified: 05-18-2020, 11:27 PM by fromFDMtoSLA.)
M_400 is a failure of the USB-stick, the cableing or the files on the stick.
OK, do what you want, i am off now. may other users try to help you. Happy printing
Posts: 11
Threads: 3
Joined: May 2020
Reputation:
0
Yah the issue was the file format. I thought all the files on the key (even the minifigure stl one) were printable without slicing or anything. I got the print working now.
Posts: 1
Threads: 0
Joined: Jun 2020
Reputation:
0
I had the same problem. but mine was a dumbass me move, I forgot to hit slice, I just saved the file. Smacked myself in the head 5 minutes ago for that lol